89
To select all the images on the memory card to be dis-
played in the slide-show presentation.
Slide
show
Menu options
Playback
Duration
Settings
Enter
Repeat
All frames
Marked
Frames
1 – 60s.
Yes/No
To select specific images to be displayed in the slide-show
presentation. When this setting is chosen, the frame-selec-
tion screen will be displayed. Use the left/right keys of the
controller to highlight the image to be included in the pre-
sentation. Pressing the up key will mark the image with a
check icon. To deselect a marked image, highlight it with
the yellow border and press the down key; the check icon
will disappear. Continue until all the images have been edit-
ed. Press the controller to set the marked frames, or press
the menu button to cancel the operation and return to the
playback menu.
To select the period each image will be displayed during the
slide show.
To start the slide-show presentation. Pressing the central
button of the controller will pause the presentation. During
the slide show, press the down key of the controller to stop
the presentation and return to the playback-mode menu.
Selecting “Yes” will cause the slide show to repeat until it is
canceled using the down key of the controller. “No” will end
the slide show presentation and return to the playback-
mode menu when all the images have been displayed
once.
To Next Page
Loading...
Need help?
General
