Imagestore 750 User Manual Graphics Co-Processor
Miranda Technologies Inc. Page 249
Fill & Key Input = Fill-1/Key-1
1) Cut up one of the Intuition layers.
• Imagestore Performs Load Live on DSK1 using Fill-1/Key-1
• Imagestore cuts up DSK if it is not already
• Intuition layer now visible
2) Cut up another Intuition Layer
• Imagestore does nothing
3) Cut down one of the Intuition layers
• Imagestore does nothing because there is still one layer active
4) Cut down the final visible intuition layer
• Imagestore cuts down DSK1 and turns off load live
Warning: The Imagestore 750 maintains the layer status of the
Intuition based on the automation commands it forwards. If
the operator changes the layer status of the Intuition using
the front panel, the Imagestore 750 will not be aware of any
change and therefore will not be able to perform automatic
keyer management correctly. The same is true if the
Intuition is controlled by another automation system and not
via the Imagestore.
VertigoXG
For details on the integration of the VertigoXG graphics co-processor with
the Imagestore 750, please refer to the Miranda VertigoXG User Manual part
listed on page 6.
To Next Page
Loading...
General