Imagestore 750 User Manual Front Panel Operations
Miranda Technologies Inc. Page 91
Clean Load
Clean load removes the existing image from the store before loading the new
file. The image/animation will NOT be displayed until it is fully loaded.
Cut Load
Cut load is similar to Clean Load but the existing image remains active until
the new file is loaded. A cut transition then replaces the new image for the
old one.
Warning: Loading a new image will fail in this mode if the sum of the
resident image/animation and the new image/animation
exceeds the image memory capacity. Use Clean Load mode
when using such large animations.
Start Strap
Starts a loaded Easytext file.
Stop Strap
Stops a loaded Easytext file. The images (text) will freeze on screen.
Start Timer
Starts a loaded Bugclock timer.
Stop Timer
Stops a loaded Bugclock timer.
Reset Timer
Resets a loaded Bugclock timer.
The following commands are used to control an animation once it has been
loaded into the keyer and cut up.
Play Animation
Starts the animation from where it was stopped using the Stop Anim Now
function.
To Next Page
Loading...
General