Dolby Decode/Encode Imagestore 750 User Manual
Page 380 Miranda Technologies Inc.
Automation Control
Automation commands can be used to control some aspects of the audio
modules and to change internal metadata source values. The internal sources
of Metadata are termed a “banks”, and there are four available banks.
The commands are summarised below.
Internal Metadata Sources
The following automation commands are used to control internal metadata
sources.
• o0 Set Pitch shift code
• o1 Set Program Description
• o2 Set Program bitstream mode
• o3 Set Program audio coding mode
• o4 Set Program Center Mix Level
• o5 Set Program Surround Mix Level
• o6 Set Program Dolby Surround Mode
• o7 Set Program LFE enable
• o8 Set Program Dialogue Normalization
• o9 Set Program Production Mix level
• oA Set Program Production Room type
• oB Set Program Copyright flag
• oC Set Program Original Bitstream flag
• oD Set Program Downmix mode
• oE Set Program Downmix Lt/Rt Center mix level
• oF Set Program Downmix Lt/Rt Surround mix level
• oG Set Program Downmix Lo/Ro Center mix level
• oH Set Program Downmix Lo/Ro Surround mix level
• oI Set Program Dolby Surround EX mode
To Next Page
Loading...
General