Imagestore 750 User Manual Standard Mixfiles
Miranda Technologies Inc. Page 305
5.1_AES_dualVO.mix
This mixfile is designed for 5.1 surround AES AB mixing with dual AES
voice-overs onto AES output. It collects audio from AES input pairs 1-3 for
the A input channels, and AES input pairs 4-6 for the B input channels. The
mixfile provides 5.1 AB mixing onto AES outputs 1-3. Both voice-overs use
the dual voice-over matrix described later in this document. Voice-over 1 is
on AES input pair 7, and voice-over 2 is sourced from AES input pair 8.
5.1_AES_VO_eply.mix
This mixfile is designed for 5.1 surround AES AB mixing with single AES
voice-over and Easyplay onto AES output. It collects audio from AES input
pairs 1-3 for the A input channels, and AES input pairs 4-6 for the B input
channels. All 8 channels of Easyplay can be inserted on a one-to-one basis
onto the first 8 channels of the AB mix output, and this is controlled by the
first voice-over. External voice-over insertion is also possible on the first 8
channels of the AB mix, and this is controlled by voice-over 2 which sources
its inputs from AES input pair 7. The output of the AB mixing is routed to
AES outputs 1-3.
5.1_IntuitionVO.mix
This mixfile is designed for 5.1 surround embedded AB mixing with a single
6 channel voice-over insertion onto embedded output. It collects audio from
the first six channels of the A and B inputs, and mixes these to the program
output, incorporating a single 6-channel voice-over insertion. Physical inputs
for the voice-over are on AES inputs 1-3. The voice-over is specifically
tailored towards receiving audio input from an Intuition+.
5.1 Mix Modes
Mode 1: Standard 5.1 AB mix
In this mix mode the first 6 channels of each of the embedded inputs (or the
first 6 AES inputs) are mixed in a direct one-to-one relationship as shown on
page 302.
To Next Page
Loading...