Need help?Do you have a question about the Miranda imagestore 750 and is the answer not in the manual?
Crucial notices for safe operation, covering potential injuries and product damage.
Provides contact information for Miranda Technical Support centres globally.
Lists the primary IO connections for the Imagestore 750 unit.
Details supported SMPTE standards and resolutions for Imagestore 750 video signals.
Guides users through initial setup, including applying power and boot-up sequence.
Lists available options for Imagestore 750 with identifying codes and purpose descriptions.
Explains how to monitor and control Imagestore 750 features via the front panel joystick and display.
Details how to access and use the operational features of the Imagestore 750.
Allows adjustment of video standard, reference, serial comms, and other system parameters.
Details the Oxtel RCP components: LCD display, push-buttons, and potentiometers.
Provides access to settings for Mixer, DSK1, DSK2, and FTB parameters.
Explains operations for DSK1, DSK2, DSK3, and DSK4.
Manages audio settings for Mixer, Inputs, and Voiceover parameters.
Explains the mix file structure for creating audio mix configurations.
Defines mix files for specifying audio sources, rules, and destinations.
Assigns cross-point gain types to define input behavior within a mix.
Introduces multi-channel input management and 'input shuffles'.
Explains the Emergency Alert System (EAS) and its purpose in broadcasting.
Details the Imagestore 750 EAS option and supported EAS receivers.
Describes how EAS alerts are initiated and terminated via GPI or automation.
Guides users on selecting the EAS receiver and setting baud rates.
Explains how to control Graphics Co-Processors like Intuition via automation.
Details how Imagestore 750 can manage keyer layers for Intuition control.
Refers to the User Manual for integrating the VertigoXG graphics co-processor.
Guides users on accessing the Imagestore 750 web page via a web browser.
Provides configuration templates for designing complex audio models via the Configurator tool.
Offers a remote control applet for full control of the front panel.
Allows viewing diagnostics information like licenses, network, and serial configuration.
Covers options for updating software, full re-installation, and reverting software versions.
Provides an overview and layout of all rear panel connectors and interfaces.
Details the RJ45 Ethernet connectors for local network switch connections.
Explains the 68-pin SCSI VHDCI connector for digital AES/EBU audio channels.
Details signals on the 44-way GPIO connector, including GPI ports and LTC.
Lists supported SDI standards and connector details for video streams.
Specifies AC mains voltage, frequency tolerance, and PSU fuses.
Provides physical specifications like height, width, depth, weight, and cooling.
Details operating and storage temperature ranges, and humidity levels.
Explains the mix file structure and purpose for audio configuration.
Details mixfiles for 5.1 surround mixing with variations for AES, embedded, and voice-over.
Details mixfiles for 7.1 surround mixing with variations for AES, embedded, and voice-over.
Introduces Imagestore 750 Dolby options for integral decode/encode functionality.
Explains Dolby Digital (AC3) process for multi-channel audio in stereo signals.
Describes Dolby E as a high-quality, frame-synchronized audio compression system.
Details Dolby data-stream information (metadata) for decoding and reproduction control.
Provides technical specifications for Dolby modules and their capabilities.
Recommends Route Manager for designing audio configurations with Dolby.
Describes parameters like Metadata Type, Program Configuration, and Pitch Shift.
Introduces the Up-Mix solution for 2-channel to 5.1 surround audio conversion.
Illustrates different ways Up-Mix modules can be positioned relative to the AB mix engine.
Lists product codes for Imagestore 750 Up-Mix kit and upgrade options.
Provides technical specs for Up-Mix modules and supported modes.
Recommends Route Manager for designing audio configurations with Up-Mix modules.
Explains setting Up-Mix module to From Metadata mode for control.
Lists the required CPIO archive and ZIP file for software updates.
Outlines two mechanisms for upgrading Imagestore 750 software.
Provides steps for recovering from an interrupted software update process.
Lists parameters preserved during an upgrade from v1.14.x to v2.0.
To Next Page
General