Environment
Controller
Services Units
Table 71: Storage Environment
Condition Specification
Temperature -40º to 150ºF (-40º to +66ºC)
Humidity 15-95% Relative Humidity, non-condensing
Vibration 0.5 g, 5 to 100 Hz, any orthogonal axis
1.5 g, 100 to 500 Hz, any orthogonal axis
Mechanical Stress One 6 in. (15.3 cm) drop, each edge and corner adjacent to the rest
face – unpackaged
One 30 in. (76.2 cm) drop, each edge and corner packaged in
cardboard & foam.
Table 72: Operational Environment
Condition Specification
Temperature 40º to 122º F (4º to 50º C)
Humidity 5-95% Relative Humidity, non condensing
Maximum Heat Dissipation -
fully loaded (see Note)
500 BTUs per hour (100-user/MX)
750 BTUs per hour (250/700-user/LX, MXe Base)
850 BTUs per hours (MXe Expanded)
170 BTUs per hour (CX/CXi)
1020 BTUs per hour (CX/CXi II)
1020 BTUs per hour (AX)
Air Flow 46 cubic feet per minute at maximum output of the fans
110 cubic feet per minute at maximum output (AX only)
Acoustic Emissions Maximum 50 dBA continuous, 75 dB intermittent (<10% duty cycle)
Note: Conversion factors: 1 watt is equal to 3.412 BTUs per hour, 1 ton of refrigeration is equal to
12,000 BTUs per hour or 3.516 Kilowatts, and 3/4 Kilowatt-hour is equal to 1 ton of refrigeration.
Table 73: Storage Environment
Condition Specification
Temperature -40º to 150ºF (-40º to +66ºC)
Humidity 15-95% Relative Humidity, non-condensing
Vibration 0.5 g, 5 to 100 Hz, any orthogonal axis
1.5 g, 100 to 500 Hz, any orthogonal axis
To Next Page