48
C
ONFIGURE THE SERVER USING SERVER CONSOLE
CHAPTER 5 MAINTENANCE
3. Do one of the following:
– If you have modified only DNS server addresses configuration setting, click Finish to save the
configuration changes.
The configuration settings are applied without rebooting the system.
– If you have modified any other configuration setting, click Reboot.
The configuration settings are applied upon system reboot.
Manage trusted networks
To manage trusted networks:
1. In the Server Console main menu, click 9. Manage trusted networks, and then click Next.
2. In the configuration screens, select the following settings:
Screen Action
Primary domain name Enter the domain name (for example, mitel.com).
Enter system name Enter a system name (for example, your company name)
Select local network
adapters.
Select one or more network adapters.
NOTE:
• This screen is displayed only for an EX controller.
• If you have restored a database from the MiVoice Business
Virtual system in an EX controller, then after the restore,
select eth1 virtio_net - <IP address of the adapter> [eth1:
UP].
Local networking
parameters
Enter an available IP address (without leading zeros) that is used
to access both the Server Manager and the MiVoice Business
system.
Enter local subnet mask Enter the IP address of the subnet mask.
Enable IPv6 protocol Specify whether you want to enable IPv6 addresses.
Select WAN network
adapters
Select a network adapter. Skip if you have only LAN interfaces.
Enter gateway IP address Enter the gateway IP address.
Corporate DNS server
addresses
Enter one or more corporate DNS server IP addresses, separated
by a comma.
Resolve primary domain Specify how MSL’s DNS should resolve names for the domain.
咨询订购：400-010-8885、 Support@mitel.com.cn
To Next Page
Loading...
