21
O
VERVIEW
CHAPTER 4 SOFTWARE INSTALLATION
Software Installation
Overview
This chapter describes the following procedures that must be performed sequentially to complete the soft-
ware installation:
1. Accessing the EX Controller Deployment Tool
2. Updating the EX Controller Deployment Tool
3. Running the EX Controller Deployment Tool to Install the MiVoice Business Virtual Machine
4. Post-Installation Tasks
PC Requirements
The following lists the PC requirements for the deployment:
• Linux or Windows operating system
– Windows 10, Windows Vista (Business or Ultimate), Windows 8 or 8.1
– Minimum 4 GB RAM for Windows 10; Minimum 2 GB RAM for Windows Vista (Business or Ultimate),
Windows 8 or 8.1
• Minimum 4 GB free disk space
• JRE (Java Run-time Environment) 1.6.0_1 or later installed
• Google Chrome or Mozilla Firefox installed.
• Latest version of UltraVNC Viewer application installed.
• WinZip compression software installed (required during debugging)
Prerequisites
• Download the latest exdeploy-x.x.x.x.zip file from Mitel MiAccess > Software Download Center to
your deployment PC.
• Download the EX MiVoice Business software image zip file (MiVB-9.x.x.x-yy.img.zip) from Mitel
MiAccess > Software Download Center to your deployment PC.
• Download the latest Mitel Configuration Wizard (MiCW) executable file (MICW_7_x_x_x_x_x_-
Setup.exe) from Mitel MiAccess > Software Download Center to your deployment PC.
Accessing the EX Controller Deployment Tool
When you connect the EX Controller to a network, the Deployment Tool broadcasts its FDQN http://exde-
ploy to its local subnet through NetBIOS and acquires an IP address from the DHCP server. When the
Deployment Tool successfully acquires an IP address, you can access the Deployment Tool using its
FQDN http://exdeploy.
咨询订购：400-010-8885、 Support@mitel.com.cn
To Next Page
Loading...
