60
R
ESET THE SYSTEM ADMINISTRATION TOOL PASSWORD
CHAPTER 6 TROUBLESHOOTING
Reset the System Administration Tool Password
Overview
If you are unable to log in to the System Administration Tool as the system user, then you can reset the
password for system.
Procedure
1. Log in to the system through SSH (for example, through PuTTY) as the root user.
2. Run the following command to reset the system password:
mcdDebug ResetLoginPassword system
3. Press CTRL + C to exit the mcdDebug shell.
4. Run the logout command to log out of the system:
咨询订购：400-010-8885、 Support@mitel.com.cn
To Next Page
Loading...
