Mitel RFP 44 - Features and Limitations

Planning and Installation Guide Mitel SIP-DECT Multi-Cell for MiVoice Connect
10
FEATURES AND LIMITATIONS
The following table lists supported features, features with limitations for the DECT 600
phones on MiVoice Connect.
FEATURE STATUS NOTES
Basic Call
Supported
Making and receiving a call
Registration /
Authentication
Supported
Device registration w/o authentication
Call Hold
Supported
Putting a call on hold
Call Transfer
Supported
Transferring a call to another destination
Call Forward
Supported
Forwarding a call to another destination
Conference
Supported
Conferencing multiple calls together
Redial
Supported
Last Number Redial
Call Park
Supported
Parking a call on the system for retrieval
Caller ID Supported
Making and receiving basic calls
between MiVoice Connect and Mitel
SIP-DECT
Codec Supported
All test cases were performed using
G711ulaw and G729.
Voicemail Supported
Terminating calls to voicemail boxes
and DTMF detection.
Conference Limitation Conference with Workgroup and Voice
Mail is not supported. Phone shows up
an error “Conference is not permitted on
this call or conf.not avail”
PRACK
Limitation PRACK cannot be controlled on MiVoice
Connect system.
SIP INFO Limitation SIP INFO is not supported by MiVoice
Connect.
Speed Dial Limitation There is no option to configure
programmable buttons on Mitel SIP-
DECT for Speed Dial calls.
4 – Party
Conference
Limitation 4-Party conference is not supported by
Mitel SIP-DECT