Mitel SIP-DECT Multi-Cell for MiVoice Connect Planning and Installation Guide
7
PCMU: mu-law Pulse Code Modulation
P
oE:
Power over Ethernet
RF Radio Frequency
RFP Radio Fixed Parts
RPORT: Response Port (Refer to RFC3581 for details)
RSSI Received Signal Strength Indicator
RTP: Real-time Transport Protocol
SIP: Session Initiation Protocol
SRTP: Secure Real-time Transport Protocol
VLAN:
Virtual Local Access Network
TOS: Type of Service (policy-based routing)
URL: Uniform Resource Locator
UA: User Agent
RELATED DOCUMENTATION
• Mitel 600 DECT Phone User Guide This guide describes the DECT phone and its
functions on the SIP-DECT system. This system is made up of DECT base stations (also
known as RFPs) and controlled using OpenMobility Manager (OMM). Communication is
carried out according to a Session Initiation Protocol (SIP) and provides call control on
the Internet
• SIP-DECT OM System Manual, Administration Guide, Release 8.1 This document
describes the installation, configuration, administration, and maintenance of the SIP-
DECT solution. It also provides details about the pages in the OpenMobility Manager
interface.
• MiVoice Connect System Administration Guide Use this guide to add the users to
MiVoice Connect so that handsets can be assigned to the users. See the
Configuring Users section to add users.
To Next Page
Loading...
