Planning and Installation Guide Mitel SIP-DECT Multi-Cell for MiVoice Connect
36
DIAGNOSTICS AND TROUBLESHOOTING
This section covers the following topics related to diagnostic tools and
troubleshooting:
• TROUBLESHOOTING TIPS on page 36
• HOME/STATUS PAGE on page 36
TROUBLESHOOTING TIPS
See the Maintenance section of the SIP-DECT OM System Manual,
Administration Guide, Release 8.1
OPENMOBILITY MANAGER DOES NOT START AUTOMATICALLY
WHEN THE PC IS REBOOTED
Run the below command to stop or start OMM manually (User root):
/etc/init.d/sip-dect [start|stop|restart]./etc/init.d/sip-dect [start|stop|restart]
Note: The command line interface for OMM is accessible via telnet on port 8107.
HOME/STATUS PAGE
The Status page provides information on the DECT system status. In case of system
errors, system warning messages are also displayed on this page.
To Next Page
Loading...
