6 RAS FUNCTIONS
6.3 Error Clear
133
6
6.3 Error Clear
This function clears all the existing continuation errors at once.
Errors that can be cleared
This function can be used to clear only the continuation errors listed in the following table.
• When using the Process CPU (redundant mode), refer to the following as well.
Page 435 FUNCTIONS
• When using the SIL2 Process CPU, refer to the following as well.
Page 605 FUNCTIONS
• When using the Safety CPU, refer to the following as well.
Page 535 FUNCTIONS
Error name Error code
Power shutoff 1000H
Power shutoff (either of the redundant power supply modules) 1010H
Failure (either of the redundant power supply modules) 1020H
Invalid power supply module 1030H
Power supply module configuration error 1031H
ROM write count error 1080H
Battery error 1090H
Memory card access error 1100H
SNTP clock setting error 1120H
Default gateway/gateway IP address error 1124H
Own node port number error 1128H
Open specification port number error 1129H
Specified IP address error 112DH
Connection establishment failed 112EH
Socket communications response send error 1133H
TCP connection timeout 1134H
IP address error 1152H
Connection number acquisition error 1155H
Receive buffer securement error 1157H
UDP/IP send failed 1165H
TCP/IP send failed 1166H
Unsend data send error 1167H
Redundant IP address error 1180H
Module moderate error 1200H, 1210H
Another CPU module moderate error 1220H
Inter-module synchronization processing error 1240H, 1241H
Multiple CPU synchronization processing error 1260H, 1262H
Annunciator ON 1800H
Operation continuation error 1810H
RnCPU
RnENCPU
RnSFCPU RnSFCPU
RnPSFCPU RnPSFCPU
RnPCPURnPCPU
(Standard) (Safety)(Standard) (Safety)
(Redundant)
(Process)
Engineering tool
Clears the error.
A continuation
error occurs.
A continuation
error occurs.
No continuation
error occurs.
• Power shutdown
• Battery failure
• Constant scan time exceeded
To Next Page
Loading...
