Mitsubishi Electric MELSEC iQ-R-R00CPU - File Transfer Function (FTP Client)

824
APPX
Appendix 4 List of Special Relay Areas
*1 The CPU module where this function can be used supports these special relay areas.
File transfer function (FTP client)
The following is the list of special relay areas relating to the file transfer function (FTP client).
*1 The CPU module where this function can be used supports this special relay area.
*2 The Process CPU with firmware version "13" or later supports this special relay area.
SM1364 iQ Sensor Solution
restoration request
OffOn:Restoration
requested
OnOff:Restoration
completed
• This relay requests the iQ Sensor
Solution data restoration.
• At the timing when this relay turns from off
to on, the restoration of the set device(s)
is executed.
• This relay turns off at the completion of
the iQ Sensor Solution data restoration.
• This relay turns from on to off when the
right to use is acquired.
S (Status change)/U Rn
*1
SM1365 iQ Sensor Solution
restoration normal
completion
Off: Other than normal
completion
On: Completed normally
• This relay turns on when the iQ Sensor
Solution data restoration is completed
normally.
• When the iQ Sensor Solution data
restoration is completed with an error,
SM1366 turns on and this relay remains
off.
• This relay turns from on to off when the
right to use is acquired or the restoration
is requested.
S (Status change) Rn
*1
SM1366 iQ Sensor Solution
restoration error completion
Off: Other than error
completion
On: Completed with an
error
• This relay turns on when the iQ Sensor
Solution data restoration is completed
with an error. The error code is stored into
SD1376 or SD1377.
• When the iQ Sensor Solution data
restoration is completed normally,
SM1365 turns on and this relay remains
off.
• This relay turns from on to off when the
right to use is acquired or the restoration
is requested.
S (Status change) Rn
*1
SM1367 iQ Sensor Solution backup/
restoration suspend request
OffOn:Suspension
requested
OnOff:Suspension
completed
• This relay requests the suspension of the
iQ Sensor Solution data backup/
restoration.
• At the timing when this relay turns from off
to on, the iQ Sensor Solution data
backup/restoration is suspended.
• This relay turns off at the suspension
completion of the iQ Sensor Solution data
backup/restoration.
• This relay turns from on to off when the
right to use is acquired or the backup/
restoration is requested.
S (Status change)/U Rn
*1
No. Name Data stored Details Set by (setting timing) CPU
SM1392 FTP client connection
status
Off: Not connected
(disconnected)
On: Connected
This relay turns on when the connection
with the FTP server is established. This
relay turns off when the connection with the
FTP server is cut off.
S (Status change, END
processing)
Rn
*1
RnP
*2
No. Name Data stored Details Set by (setting timing) CPU