Mitsubishi Electric MELSEC iQ-R-R00CPU - Files; File Types and Storage Memory

32 MEMORY SPECIFICATIONS
32.4 Files
531
32
32.4 Files
This section lists the files used by the Safety CPU.
File types and storage memory
The following table summarizes the types of files stored in the Safety CPU and storage memory.
: Required, : Can be stored, : Cannot be stored
*1 mmm represents the start I/O number (first three digits in four-digit hexadecimal representation) of each module. For the Safety CPU, it
will be 3FFH. Also, nn represents the consecutive number (two-digit hexadecimal representation) of module extension parameter files of
each module.
*2 nn corresponds to the setting number and is 01 through 10.
*3 Can be stored but cannot operate as a function.
*4 When this file is stored in the built-in memory of the Safety CPU, it is divided into program memory and data memory and stored. (
Page 106 Configuration of a program file)
*5 Module extension parameter for the protocol setting, storing protocol setting information in the predefined protocol support function
*6 One or more of either standard program or safety program is required.
*7 The file is also stored in the safety function module.
*8 This parameter relates to safety control inside the CPU parameters. ( Page 936 Safety CPU parameters)
This item is yellow in the engineering tool CPU parameters.
File type CPU built-in memory SD memory
card
File name and
extension
Program
memory
Device/label
memory
Data
memory
Drive 0 Drive 3 Drive 4 Drive 2
Standard program 
*4*6

*4*6
 ANY_STRING.PRG
Standard FB file 
*4

*4
 ANY_STRING.PFB
Standard CPU parameter CPU.PRM
System parameter SYSTEM.PRM
Standard module parameter UNIT.PRM
Module extension parameter  • UEXmmmnn.PRM
*1
• UEXmmm00.PPR
*5
Memory card parameter MEMCARD.PRM
Device comment ANY_STRING.DCM
Initial device value ANY_STRING.DID
Standard global label setting file GLBLINF.IFG
Initial label value file Initial global label value
file
GLBLINF.LID
Initial local label value
file
PROGRAM_NAME.LID
File register 
*3
ANY_STRING.QDR
Event history EVENT.LOG
Device data storage file 
*3
DEVSTORE.QST
General-purpose data ANY_STRING.CSV/BIN
Data logging setting file Common setting file LOGCOM.LCS
Individual setting file LOGnn.LIS
*2
Remote password 00000001.SYP
Safety program
*7

*4*6

*4*6
 ANY_STRING.SPG
Safety FB file
*7

*4

*4
 ANY_STRING.SPB
Safety CPU parameter
*7*8
CPU.SPR
Safety module parameter
*7
UNIT.SPR
Safety global label setting file
*7
GLBLINF.SIF
Standard/safety shared label setting file
*7
S_GLBLINF.SIF