36 PROCEDURE FOR STARTING UP A SYSTEM USING THE SIL2 PROCESS CPU
36.3 Creating a Project
599
36
36.3 Creating a Project
Start the engineering tool and create a project.
[Project] [New]
Users with an access level of "Developers" and "Users" can be added. For details on the access level, refer to
the following.
GX Works3 Operating Manual
1. Select a SIL2 Process CPU to be used for "Type". The setting
for "Mode" is fixed to "Redundant". Select a programming
language to be used for "Programming Language" and click
the [OK] button.
2. When creating a new project, registration of user information
for the user authentication function is required. Set a user
name and password.
( GX Works3 Operating Manual)
To Next Page
Loading...
