Mitsubishi Electric MELSEC iQ-R-R00CPU - Module Parameters

936
APPX
Appendix 10 Parameter List
Module parameters
The following are the lists of module parameters.
Ethernet function
For the module parameters relating to the Ethernet function, refer to the following.
 MELSEC iQ-R Ethernet User's Manual (Application)
CC-Link IE Field Network Basic function
The following is the list of module parameters relating to the CC-Link IE Field Network Basic function.
CPU module database access function
The following is the list of the module parameter related to the CPU module database access function.
Safety CPU parameters
The following is the list of safety CPU parameters.
Memory card parameters
The following is the list of memory card parameters.
Routing Setting Routing Setting 3800H
SFC Setting SFC Program Start Mode Setting 3C00H
Start Condition Setting 3C00H
Output Mode at Block Stop Setting 3C00H
Redundant System Settings Redundant Behavior Setting 5000H
Tracking Setting Signal Flow Memory Tracking Setting 5001H
Tracking Device/Label Setting 5001H
Safety Tracking Setting 5A30H
Item Parameter No.
CC-Link IEF Basic Setting Network Configuration Settings 7A00H
Refresh Settings 7420H
Item Parameter No.
Application settings Built-in Database Access Setting A0E0H
Item Parameter No.
Memory/Device Setting Device/Label Memory Area Setting Device/Label Memory Area Capacity Setting 5A00H
Safety Device Point Quantity Setting 5A01H
Safety Local Device Setting 5A05H
Program Setting Program Setting Execute Order 5A13H
Program Name 5A10H, 5A13H
Execution Type 5A10H
Refresh Group Setting 5A10H
Device/File Use or not 5A10H
FB/FUN File Setting 5A12H
Safety Function Setting Safety Cycle Time 5A20H
Safety I/O Hold Time 5A21H
Item Parameter No.
Boot Setting 2000H
Setting of File/Data Use or Not in Memory Card 2010H
Item Parameter No.