22 LABELS
22.7 Label Access Setting from External Device
383
22
22.7 Label Access Setting from External Device
This setting enables external devices to communicate with the CPU module through GOT, SLMP, or other method by
specifying global label names.
• This function cannot be used in the R00CPU, R01CPU, and R02CPU.
• When using the Process CPU (redundant mode), refer to the following as well.
Page 435 FUNCTIONS
• When using the SIL2 Process CPU, refer to the following as well.
Page 605 FUNCTIONS
• When using the Safety CPU, refer to the following as well.
Page 535 FUNCTIONS
RnCPU
RnENCPU
RnSFCPU RnSFCPU
RnPSFCPU RnPSFCPU
RnPCPURnPCPU
(Standard) (Safety)(Standard) (Safety)
(Redundant)
(Process)
GOT
Ethernet
1234Hz
External devices such as a monitoring device and personal computer
(such as SLMP and MC protocol)
Communication using label names and program languages
such as C language and VB is possible.
External devices such as a monitoring
device and personal computer
GOT (GT Works3)
Label names can be specified for objects
and figures.
CPU module
Configure the setting
to allow the access
from external devices.
Frequency
Start Stop
To Next Page
Loading...
