37 FUNCTIONS
37.11 Safety Communication Function
661
37
Setting method
The following shows the setting method of the safety I/O hold time.
[CPU parameter] [Safety Function Setting]
Note that the time until a timeout of safety communications increases in length by the amount of the setting
value of the safety I/O hold time.
Item Description Setting range Default
Safety I/O Hold Time Set the safety I/O hold time. If safety communications recovered
successfully within the set safety I/O hold time, processing continues.
0.0 to 180.0s (in increments
of 0.1s)
10.0s
To Next Page
Loading...
