APPX
Appendix 2 Event List
789
A
Detailed information 2 Communication speed and communication
mode
Information on the communication speed and the communication mode
Communication status Information on the communication status
Security key operation information Information on the corresponding security key
Remote password information Information on the corresponding remote password
File password information Information on the corresponding file password
Blocked IP address information Information on the blocked IP address
Drive/file information Information on the corresponding drive name and file name
Drive number and file name Information on the corresponding drive number and file name
Copy source drive/file information Information on the corresponding drive name and file name
Operation target information Information on the operation target: I/O number
Clock information (before change) Clock information before change
Remote operation type information Information on the remote operation type
User authentication information Information on the user authentication function status (enabled/disabled)
User management information copy Information on user management information copy (succeeded/failed)
Login/logout information Login/logout information of the user authentication function
File access control information Information on file access control: access level
Device/label information Information on the corresponding device and label
System configuration information Information on the system configuration
Target folder information of the CPU module
data backup/restoration function
Information on the data backup/restoration target folder (folder specification, date,
number)
Target device information of the data backup/
restoration function of iQ Sensor Solution
Information on the data backup/restoration target device (station number, station
sub-ID number, ID number, IP address)
System A/B setting information Information on the system A/B setting
System switching information Information on the system switching cause, the cause of system switching failure,
and the transition state of the systems (control system and standby system)
Control system start-up cause information Information on the start-up cause of the control system
Error description (the other system) Description of the error when an error was detected in the other system
Cause of tracking communication stop Cause of tracking communication stop
Target station information Error description (error codes) of target station
Detailed information 3 Clock information (after change) Clock information after change
Copy destination drive/file information Information on the corresponding drive name and file name
Detailed
information
Item Description
To Next Page
Loading...
