Mitsubishi Electric MELSEC iQ-R-R00CPU - Page 92

90
2 CPU MODULE OPERATION PROCESSING
2.2 Operation Processing When Operating Status Is Changed
Setting the output mode
Set the mode in "Output Mode Setting of STOP to RUN".
[CPU Parameter]  [Operation Related Setting]  [Output Mode Setting of STOP to RUN]
Window
Displayed items
Item Description Setting range Default
Output Mode of STOP to
RUN
Set the operation of the output (Y) when the operating
status is changed from STOP to RUN.
• Output the Output (Y) Status before STOP
• Clear (Output is 1 scan later) the Output
(Y)
Output the Output
(Y) Status before
STOP