Mitsubishi Electric MELSEC iQ-R-R6SFM - Page 844

842
APPX
Appendix 5 List of Special Register Areas
SD113 to
SD143
Detailed
information 2
Detailed
information 2
■SD114
• b0 to b7: Parameter type (stored in the following value)
1: System parameter
2: CPU parameter
3: Module parameter
4: Module extension parameter
5: Memory card parameter
6: Safety system parameter
7: Safety CPU parameter
8: Safety module parameter
• b8 to b15: Parameter storage location (2: SD memory card, 4: Data
memory)
■SD115: I/O number
FFFFH is stored when no I/O number is assigned.
■SD116: Parameter number
■SD117: Network number
■SD118: Station number
0 to 120 (0 is stored for the master station.)
■SD119 to SD129: System information
(5) System configuration information
■SD113: With or without specification
b0: I/O number
b1: Slot number
b2: Base number
b3: Power supply number
b4: CPU number
b5: Network number
b6: Station number
■SD114: I/O number
■SD115
• b0 to b7: Slot number (0 to 11)
• b8 to b15: Base number (0: Main base unit, 1 to 7: Extension base unit
level 1 to level 7, 8: Higher than level 7)
■SD116
• b0 to b7: Power supply number (1 to 2: Power supply 1 to 2)
• b8 to b15: CPU number: (1 to 4: CPU 1 to 4)
■SD117: Network number
■SD118: Station number
0 to 120 (0 is stored for the master station.)
S (Error) ALL
No. Name Data stored Details Set by
(setting
timing)
CPU
b15 b8 b7 b0
b1b2b3b4b5b6 b0
b15 b8 b7 b0
b15 b8 b7 b0