234
19 TEST FUNCTION
19.1 External Input/Output Forced On/Off Function
Operation method of forced on/off
Use the engineering tool for the forced on/off operation.
[Debug] [Register/Cancel Forced Input/Output]
■In redundant mode
Forced on/off operations are performed for the control system. However, registration status update can be performed for both
systems. (There is no difference between operation modes.)
: Operation possible, : Operation not possible
Item Description
Device Enter target devices (X, Y).
[Register Forced ON] button Registers forced on for the entered devices (X, Y).
[Register Forced OFF] button Registers forced off for the entered devices (X, Y).
[Cancel Registration] button Cancels forced on/off for the registered devices (X, Y).
[Update Status] button Displays the latest on/off states.
[Cancel All Registrations] button Batch-cancels forced on/off for the registered devices (X, Y).
Operation item Control system Standby system
Forced on registration
Forced off registration
Registration cancellation
Registration batch cancellation
Registration status update
To Next Page
Loading...
