Mitsubishi Electric MELSEC iQ-R Series - Creating a Project

4 START-UP PROCEDURE
4.5 Creating a Project
41
4
4.5 Creating a Project
Activate the engineering tool and create a project.
[Project]  [New]
Procedure
Create a program, following the procedure below. The procedure is for the program described in ladder diagrams.
1. Select "RCPU" in "Series", and the CPU module model to use in "Type".
Then, select a programming language to use in the project in "Program".
Select "Ladder", and click the [OK] button.
2. Click the [OK] button when the window for adding the module appears.