Mitsubishi Electric MELSEC iQ-R Series - Appendix 13 Added and Enhanced Functions

APPX
Appendix 13 Added and Enhanced Functions
747
A
Appendix 13Added and Enhanced Functions
This section describes added and enhanced functions of the CPU module and the engineering tool, as well as the firmware
versions of the CPU module and software versions of the engineering tool corresponding to the functions.
The firmware update function enables users to update the firmware versions of the CPU module. For the
target CPU modules and how to update the firmware version, refer to the following.
 MELSEC iQ-R Module Configuration Manual
: Supported from the first released product, : Not supported, : Function usable regardless of the software version
Added or enhanced function F: Firmware version of the CPU module
S: Software version of the engineering tool
O: Version of the other tools
Reference
Process mode Redundant mode
Mounting of MELSEC iQ-R series
modules occupying two slots
F: 
S: 1.007H
F: 
S: 1.007H
For the applicable modules, refer to the
following.
MELSEC iQ-R Module Configuration Manual
SFC support F: 03
S: 1.020W
O: 1.54G
*1*2*3
F: 18
S: 1.050C
MELSEC iQ-R Programming Manual
(Program Design)
Duplication check for POU F: 04
S: 1.025B
F: 04
S: 1.025B
GX Works3 Operating Manual
Background processing of program
transfer (writing the program restoration
information) during changing a program
online
F: 10
S: 1.022Y
F: 15
S: 1.045X
GX Works3 Operating Manual
CPU module data backup/restoration
function
F: 20
S: 
F: 20
S: 
Page 308 CPU MODULE DATA BACKUP/
RESTORATION FUNCTION
Redundant function  F: 04
S: 1.025B
Page 370 REDUNDANT FUNCTION
Redundant power supply system F: 04
S: 1.025B
F: 04
S: 1.025B
MELSEC iQ-R Module Configuration Manual
Label initialization function F: 04
S: 1.025B
F: 04
S: 1.025B
Page 522 LABEL INITIALIZATION
FUNCTION
Firmware update function (Firmware
update using the engineering tool)
F: 24
S: 1.065T
F: 24
S: 1.065T
MELSEC iQ-R Module Configuration Manual
Firmware update function (Firmware
update using an SD memory card)
F: 14
S: 
F: 14
S: 
MELSEC iQ-R Module Configuration Manual
External input/output forced on/off
function
F: 15
S: 1.045X
F: 15
S: 1.045X
Page 232 External Input/Output Forced On/
Off Function
Multiple CPU system F: 
S: 1.007H
 MELSEC iQ-R Module Configuration Manual
Program restoration information write
selection
F: 13
S: 1.040S
F: 15
*4
S: 1.045X
*4
Page 741 Program Restoration Information
Write Selection
File batch online change of FB files and
the global label setting file
F: 13
S: 1.040S
F: 13
S: 1.040S
Page 193 File batch online change
File batch online change when the
program memory does not have enough
free space
F: 13
S: 1.040S
F: 13
S: 1.040S
Page 193 File batch online change
Error detection invalidation setting F: 14
S: 
F: 14
S: 
Page 207 Error detection invalidation setting
'Communication load status' (Un\G100 to
Un\G103)
F: 22
S: 
F: 22
S: 
MELSEC iQ-R Ethernet User's Manual
(Application)
Online change (SFC block) F: 20
S: 1.055H
F: 20
S: 1.055H
MELSEC iQ-R Programming Manual
(Program Design)
Omission of writing files that are not
changed
F: 18
S: 1.050C
F: 18
S: 1.050C
GX Works3 Operating Manual
Device test with execution conditions F: 20
S: 1.055H
F: 20
S: 1.055H
Page 241 Device Test with Execution
Conditions