Mitsubishi Electric MELSEC iQ-R Series - Operation Settings; Stop Setting

338
23 MULTIPLE CPU SYSTEM FUNCTION
23.2 Operation Settings
23.2 Operation Settings
This section describes the operation settings of the multiple CPU system function.
Stop setting
An operating status, whether to stop the operation of all the CPU modules or not, if a major or moderate error occurs in any of
the CPU modules is set.
[System Parameter]  [Multiple CPU Setting]  [Operation Mode Setting]  [Stop Setting]
Window
Displayed items
Applicable errors to the stop setting
The following table lists the applicable errors to the setting that specifies the operation of all the CPU modules of when a major
or moderate error has occurred in any of the CPU modules.
Item Description Setting range Default
PLC
No.1
Set whether to stop the operation of all the CPU modules or
not if a major or moderate error occurs in CPU No.1.
• Major: All Station Stop, Moderate: All Station Stop
• Major: All Station Stop, Moderate: All Station Continue
• Major: All Station Continue, Moderate: All Station Continue
Major: All Station
Stop, Moderate:
All Station Stop
PLC
No.2
Set whether to stop the operation of all the CPU modules or
not if a major or moderate error occurs in CPU No.2.
PLC
No.3
Set whether to stop the operation of all the CPU modules or
not if a major or moderate error occurs in CPU No.3.
PLC
No.4
Set whether to stop the operation of all the CPU modules or
not if a major or moderate error occurs in CPU No.4.
Error name Error code
Another CPU module moderate error 1220H
Another CPU module major error 2461H, 2462H, 2470H