Mitsubishi Electric MELSEC iQ-R Series - END Processing Time

710
APPX
Appendix 7 Processing Time
END processing time
The END processing time includes the following:
• Common processing time
• I/O refresh processing time
• Link refresh processing time for the network module
• Intelligent function module refresh processing time
• Multiple CPU refresh processing time
• Prolonged time of END processing when executing each function
• Device/label access service processing time
• Tracking transfer time ( Page 724 Increase in the scan time due to tracking transfer)
Common processing time
The following table lists the common processing time of each CPU module to be treated by the system.
The common processing time by the system is 85s for one unit of CPU module (module is not mounted).
Condition Common processing time
Process mode Redundant mode
One unit of CPU module (module is not
mounted)
100s190s