Mitsubishi Electric MELSEC iQ-R Series - Chapter 32 Constants; Decimal Constant (K); Hexadecimal Constant (H)

526
32 CONSTANTS
32.1 Decimal Constant (K)
32 CONSTANTS
This section describes constants.
32.1 Decimal Constant (K)
Use this type of constants when specifying decimal data in a program. Specify the decimal constant using K character (e.g.
K1234). The specification range depends on the argument data type of the instruction using the decimal constant as shown in
the following table:
32.2 Hexadecimal Constant (H)
Use this type of constants when specifying hexadecimal data in a program. Specify the hexadecimal constant using H
character (e.g. H1234). To specify data in BCD, specify each digit of hexadecimal value with numerical characters 0 to 9. The
specification range depends on the argument data type of the instruction using the hexadecimal constant. The range is H0 to
HFFFF for 16-bit data size, and H0 to HFFFFFFFF for 32-bit data size.
Argument data type of the instruction Specification range for decimal constant
Data size Data type name
16 bit Word (signed) K-32768 to K32767
Word (unsigned)/bit string (16 bit) K0 to K65535
16-bit data K-32768 to K65535
32 bit Double word (signed) K-2147483648 to K2147483647
Double word (unsigned)/bit string (32 bit) K0 to K4294967295
32-bit data K-2147483648 to K4294967295