APPX
Appendix 3 Functional Availability by CPU Module Model
643
A
Appendix 3 Functional Availability by CPU Module
Model
The following table lists the availability of functions by CPU module model.
Rn: RnCPU, RnEN: RnENCPU, RnP(P): Process CPU (process mode), RnP(R): Process CPU (redundant mode), RnPSF:
SIL2 Process CPU, RnSF: Safety CPU
: Supported, : Not supported
Function Availability
*1
Rn RnEN RnP(P) RnP(R) RnPSF RnSF
Constant scan
Device/label access service processing setting
Device/label access service processing constant wait function
Interrupt function Multiple interrupt function
Output mode setting when the status changed from STOP to RUN
Device/label memory area setting
Internal buffer capacity setting
*3
SD memory card forced disable
*3
Clock function
Writing data to the CPU
module
Writing data to the programmable controller
Online change (ladder block)
Online change (files)
RAS function Scan monitoring function
Self-diagnostics function
FB hierarchy information
Error clear
Event history function
Online module change
Program cache memory auto recovery function
Remote operation
Boot operation
*3
Monitor function Circuit monitor
Device/buffer memory batch monitor
Watch
Program monitor list
Interrupt program monitor list
Real-time monitor function
Scan time measurement
Scan time clear
Specified program monitor
Test function External input/output forced on/off function
Device test with execution condition
Data logging function
*3
Recording function
*2
Debug function Memory dump function
*3
SFC function
Database function Database access instruction
*2
CPU module database access (from external
device) function
*2
PID control function
Process control function
CPU module data backup/restoration function
*2
To Next Page
Loading...
