Mitsubishi Electric MELSEC iQ-R Series - Page 662

660
APPX
Appendix 4 List of Special Relay Areas
SM1216 Data logging setting No.1
Data logging error
Off: No error
On: Error
• This relay switches to on when a data logging function
error is generated.
• This relay switches to off when the setting is registered or
by the stop command from CPU Module Logging
Configuration Tool.
S (Status change)
SM1217 Data logging setting No.1
Data logging data saving in
progress
Off: Not in progress
On: In progress
This relay turns on when data in the internal buffer is being
saved in the SD memory card with the data logging.
S (Status change)
SM1218 Data logging setting No.1
Logging data storage file
switching in progress
Off: Not in progress
On: In progress
This relay switches to on when storage file switching is in
progress.
S (Status change)
SM1220
to
SM1228
Data logging setting No.2 Same configuration as the
setting No.1
Data configuration is the same as the setting No.1
(SM1210 to SM1218).
Same
configuration as
the setting No.1
SM1230
to
SM1238
Data logging setting No.3 Same configuration as the
setting No.1
Data configuration is the same as the setting No.1
(SM1210 to SM1218).
Same
configuration as
the setting No.1
SM1240
to
SM1248
Data logging setting No.4 Same configuration as the
setting No.1
Data configuration is the same as the setting No.1
(SM1210 to SM1218).
Same
configuration as
the setting No.1
SM1250
to
SM1258
Data logging setting No.5 Same configuration as the
setting No.1
Data configuration is the same as the setting No.1
(SM1210 to SM1218).
Same
configuration as
the setting No.1
SM1260
to
SM1268
Data logging setting No.6 Same configuration as the
setting No.1
Data configuration is the same as the setting No.1
(SM1210 to SM1218).
Same
configuration as
the setting No.1
SM1270
to
SM1278
Data logging setting No.7 Same configuration as the
setting No.1
Data configuration is the same as the setting No.1
(SM1210 to SM1218).
Same
configuration as
the setting No.1
SM1280
to
SM1288
Data logging setting No.8 Same configuration as the
setting No.1
Data configuration is the same as the setting No.1
(SM1210 to SM1218).
Same
configuration as
the setting No.1
SM1290
to
SM1298
Data logging setting No.9 Same configuration as the
setting No.1
Data configuration is the same as the setting No.1
(SM1210 to SM1218).
Same
configuration as
the setting No.1
SM1300
to
SM1308
Data logging setting No.10 Same configuration as the
se
t
ting No.1
Data configuration is the same as the setting No.1
(SM1210 to SM1218).
Same
configuration as
the setting No.1
SM1312
to
SM1321
Data logging setting No.1 to
10
Data logging suspend/resume
flag
OffOn: Suspend
OnOff: Resume
• When this relay changes from off to on, the data logging
function is suspended. In an off state of the data logging
start SM, no processing is performed.
• When this relay changes from on to off, the data logging
function resumes. In an ON state of the data logging start
SM, no processing is performed.
U
No. Name Data stored Details Set by (setting
timing)