5. HOW TO USE THE PROGRAM
5 - 13
The acceleration/deceleration time constants for the preceding "MOVI" command is also applied to
those for the "MOVIA" command.
Command Name Setting Unit Description
MOV Absolute value travel
command
MOV
(setting value)
×10
STM
μm Absolute value travel
command
MOVA Absolute value continuous
travel command
MOVA
(setting value)
×10
STM
μm Absolute value continuous
travel command
MOVI Incremental value travel
command
MOVI
(setting value)
×10
STM
μm Incremental value travel
command
MOVIA Incremental value
continuous travel command
MOVIA
(setting value)
×10
STM
μm Incremental value
continuous travel command
To Next Page
Loading...
