3 - 34 3 - 34
MELSEC-Q
3 SPECIFICATIONS
(1) Remote master station remote I/O station
(a) Cyclic transmission (X/Y/W periodic communication)
Transmission delay time of X/Y/W is the sum of the following.
• Remote master station scan time (Except for the link refreshing time)
• Remote master station link refresh time
• Link scan time
• Remote I/O station I/O refresh (X/Y) or automatic refresh (W)
Calculate the sum as shown below:
(Note that for X/Y communication time, it is necessary to add the I/O
module response delay time to the calculation)
[X transmission delay time (T
DX
)]
[Remote master station scan time (Sm) > link scan time (LS)]
T
DX
= (Sm + αm) 2 + Sm + T
RIOR
[ms]
0: 0 step
E: END step
0E
Sm
αm
LS
Remote master station
Link scan time
Remote I/O station
T
DX
ON
X
The master station
confirms the X attached
near the end step
T
RION
0E
Sm
αm
0E
Sm
αm
0E
Sm
αm
0E
Sm
αm
0E
Sm
LS LS LS LS
[Remote master station scan time (Sm) < link scan time (LS)]
T
DX
= (Sm + αm) round up [LS/(Sm + αm)] 2 + Sm + T
RIOR
[ms]
LS
T
DX
ON
X
LS LS
T
RION
Remote master station
Link scan time
Remote I/O station
0E
Sm
αm
0E
Sm
αm
0E
Sm
αm
0E
Sm
αm
0E
Sm
αm
0E
Sm
0: 0 step
E: END step
The master station
confirms the X attached
near the end step
Sm
αm
LS
T
RIOR
round up
: Remote master station scan time
: Remote master station link refresh time
: Link scan time
: I/O refresh time
: Round up the decimal point of the result operation [LS/(Sm + αm)]
POINT
The same formula is used to calculate the transmission delay time (T
DX
)
independently of the Secured data send/receive setting.
To Next Page
Loading...
Need help?
General
