Mitutoyo ID-F125 - 1.2 Detail of LCD

⑦ DC jack ⑭ ON/OFF key
1.2DitailofLCD 
-1-
① Analog range ⑧ Function lock ⑮ Preset the origin
① Upper over range ⑨ Relative measure ⑯ GO/NG judgment display
① Upper pointer(blink) ⑩ Reverse dir. measure
① Pointer ⑪ Min. peak hold mode
① Lower pointer(blink) ⑫ TIR mode
① Lower over range ⑬ Max. peak hold mode
① Hold sign ⑭ Unit
 The pointers ③,④and⑤ blink more quickly when two or more overlap.
 The parameters indicated by pointers ③ and ⑤ are determined by the measurement mode, as
shown below.
mode Nomal Tolerance Max.peak hold Min.peak hold TIR hold
③
(disappear)
Upper limit Max. point
(disappear)
Max. point
⑤
(disappear)
Lower limit
(disappear)
Min. point Min. point
MANUAL No.99MAH001B2
-2-