Mitutoyo ID-F125 - 6 SPECIFICATIONS; 6.1 Specifications of the main unit; 6.2 Standard accessories; 6.3 Optional accessories

6 SPECIFICATIONS
6.1 Specificationsofthemainunit
Modelname ID-F125 ID-F150 ID-F125E ID-F150E
CodeNo.*1 543-551-1 543-553-1 543-552-1 543-554-1
Designations 25.4-0.001mm 50.8-0.001mm 25.4-0.001mm/1-.00005" 50.8-0.001mm/2-.00005"
Resolution 0.001mm/0.01mm 0.001/0.01mm/.00005/.0005/.0001/.001"
Measurerange 25.4mm 50.8mm 25.4mm=1" 50.8mm=2"
Accuracy*2 0.003mmorless 0.006mmorless 0.003mm(.00012")orless 0.006mm(.00024")orless
Standards ISOR463/JISB7503 ANSIB89.1.10/AGD
Stemdiameter Ø8mm Ø9.52mm=3/8"DIA
Contactpoint Carbide(M2.5x0.45) Steel(#4-48UNF)
Measuringforce 1.8Norless 2.3Norless 1.8Norless 2.3Norless
Protectionlevel EquivalenttoIP-30(IEC60529/JISD0207,C0920atconditionsex-works)
Plungerdirection Belowthehorizon
Powersupply ACadapter9V500mA
Operatingtemp. 0℃〜40℃
Storagetemp. -10℃〜60℃
Netweight 約240g 約330g Approx.240g(0.53lbs) Approx.330g(0.73lbs)
*1.This Order No. mean only the main unit without AC adapter.
*2.Not including the quantizing error.
6.2 Standardaccessories
#99MAH001B User’s manual
#137693 Lifting lever
#526688 AC adapter(100V, Japan, &c.)
#526688A AC adapter(120V, USA, &c.)
#526688D AC adapter(230V, Germany, &c.)
#526688E AC adapter(230V, UK, &c.)
6.3 Optionalaccessories
#540774 Release cable
#543-003 Digimatic Presetter
#936937 M-SPC cable 1m
#965014 M-SPC cable 2m
#101040 Lug-on-center back(for JIS/ISO model)
#101306 Lug-on-center back(for AGD model)
#02ACA571 Coil spring for upside-down position (125 model)
#02ACA773 Coil spring for upside-down position (150 model)
MANUAL No.99MAH001B2
-14-