Configuration Guide
Leviton Dimensions 4000 Series Architectural Lighting Controller
Page 18
OPERATION SETUP QUICK START OVERVIEWCONFIGURATION
Setup
The setup section covers all requirements to ready this device for
use. Generally, the settings in this section are only required the
first time your device is put into service. More routine
configuration requirements are covered in the operation and
configuration sections of this manual.
To complete setup you must use both of the basic and advanced
menus. The functionality of the basic operation menus can be
found in the section “Operation” on page 44. The advanced
menus required for setup are accessed the same way as the
operation mode menus by pressing the “Menu” key. The
procedure for enabling the advanced mode menus can be found
in the section “Accessing the Configuration Menus” on page 19.
The Basic operation mode menus are used for the following
tasks:
• Set Date/Time
• Set Daylight Savings time
• Set record/station locks and their codes
• View, Edit, Activate Schedule
• View, Edit, Activate Sequencer
• Edit Scene Labels
• Edit Excludes
The advanced setup mode menus add the following options:
• Zone Assignment
• Local/Remote dimmer configuration
• Network Settings
• Miscellaneous Settings
• Personalities
To Next Page
Loading...
Need help?
General