Page 59
Step 3: Press the Select/Save button.
• The CODE field flashes
Step 4: Press the Up and Down buttons to change
the value.
• Note: Press
Clear
to reset the value to
000
.
Step 5: Press the Select/Save button to save the value.
•
SET RECORD LOCK?
flashes again.
Step 6: Press the Menu/Cancel button to exit this menu.
Setting the Station Lock Code
The Station Lock Code must be a number between 000 and 999.
The default code is 000.
Shortcut
: Use a code number between 000 and 999,
as the Preset - Scene buttons 1 to 8 and MAX (9) and
OFF (0) can be used to enter the code directly.
To set the station lock code:
Step 1: Press the Menu/Cancel button.
Step 2: Press the Up and Down buttons until SET
STATION LOCK flashes on the LCD display.
Step 3: Press the Select/Save button.
• The CODE Field flashes
Step 4: Press the Up and Down buttons to change
the value.
• Press
Clear
to reset the value to
000
.
Step 5: Press the Select/Save button to save the value.
Step 6: SET STATION LOCK? flashes again.
Step 7: Press the Menu/Cancel button to exit this menu.
Enabling the Record Lock
Be sure to set the Record Lock code before enabling
the Record Lock.
To Next Page
Loading...
Need help?
General