Instruction Manual #122162 7
This equipment contains no user serviceable part. Refer all
repairs to MKS.
Do not operate this equipment without proper exhaust
connections.
Safety Alert Labels
Safety labels and identification labels are placed on the robot and controller to provide operators
with information. This section describes each label and identifies its location. For safety labels,
instructions are provided on how to avoid the hazard.
Warning Label – Hazardous Voltage
Location: On Power Supply Brick
Possible Injuries: Electric Shock or Burn
How to avoid hazard: Unplug and lockout before service.
Warning Label – Refer to manual
Location: TIM/Valve
Possible Injuries: Various
How to avoid hazard: Read and understand manual
before installation or use of equipment.
Disconnect Devices and Interlocks
Safety Interlocks
This product does not have an Emergency Off (EMO) circuit.
Using this product without an EMO may cause personal injury
or death.
The user must provide a disconnect device for the product
power that complies with local electrical codes.
Personnel servicing this product are responsible for disconnect
as specified by the facility Lockout/Tagout procedures.
To Next Page
Loading...
Need help?
General
