Instruction Manual #122162 8
Grounding
The power source to which this product is connected must be properly grounded in accordance
with all electrical codes pertaining to high voltage electrical equipment in an industrial
environment.
See Grounding in the following documentation for more detailed requirements regarding gauge
and system grounding.
Electrical Shock
Improper electrical connection or connection to an improper
electrical supply can result in electrical shock, burns, fire, and
damage to the equipment and death or serious injury.
Always use proper power and proper electrical compliant
connections in accordance with local electrical code.
Fire and Explosion Hazards
The Product provides no direct fire or explosion hazard.
Explosive Environment
Do not use the product in an environment of explosive or
combustible gases or gas mixtures. Operation of any electrical
instrument in such an environment constitutes a definite safety
hazard. Do not use the product to measure the pressure of
explosive gases or gas mixtures.
Damaged Components
This equipment has not been evaluated for use in exhaust lines
containing flammable gases at concentrations at, or in excess
of their Lower Explosive Limit (LEL), or for hazardous locations
and environments.
Responsibility
It is the responsibility of the Customer to comply with all local, state, and federal ordinances,
regulations, and laws applicable to the installation, operation and service of this equipment.
It is the responsibility of the end user to provide sufficient lighting at work to meet local
regulations.
Operation and Service of this equipment in strict accordance with the methods and procedures
supplied by MKS is the responsibility of the Customer.
To Next Page
Loading...
Need help?
General
