EasyManua.ls Logo

Mobatime DTS 4801.masterclock - Serial Connection; Telnet; Ssh

Mobatime DTS 4801.masterclock
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© MOBATIME 18 / 120 800652.11
6.1.1 Serial connection
38400 Bauds, 8 data bits, no parity, 1 stop bit.
Windows 2000, XP, Vista: HyperTerminal
Windows 7: Putty (Download from Internet)
Linux: Minicom
Switch off Xon/Xoff and hardware handshake.
After establishing the serial connection, the menu can be initialized with ENTER.
When rebooting, the boot process will be displayed on the serial console.
Attention:
The serial connection should always be disconnected before switching off
the operating PC (exit terminal program or pull out the RS232).
6.1.2 Telnet
Windows 98, 2000, XP, Vista, Windows 7: Start Run telnet [IP-address]
Password: dts
NetTerm (Shareware)
Linux: Start console and enter “telnet [IP-address]
6.1.3 SSH
Windows 98, 2000, XP, Vista, Windows 7: e.g. with Putty
Linux: Start console and enter “ssh dts@[IP-address]
Password: dts
!

Table of Contents

Related product manuals