Mobatime DTS 4801.masterclock - Status and Configuration Settings

© MOBATIME 26 / 120 800652.11
6.5 Configuration menu
Configuration of the DTS 480x via different sub-menus:
1. Configuration of the lines / outputs (MOBALine, impulse line, DCF active code line,
DCF out, RS485 line, serial telegrams, NTP slave clock lines, switch functionality)
see chapter "6.5.1 Lines"
2. Configuration of the time source, time keeping, etc.
See chapter "6.5.11 Time handling"
3. Alarm settings (alarm relais, e-mail, SNMP)
See chapter "6.5.17 Alarms"
4. General settings for the DTS 480x (language, time zone for alarms and display,
password for menu...)
See chapter "4.4.21 General settings"
5. Netzwork settings
See chapter "6.5.23 Network"
6. Services (switch network services such as FTP, Telnet, SSH on or off)
See chapter "6.5.24 Services (Network services FTP, Telnet, SSH....)"
7. SNMP configuration for GET/PUT.
See chapter "6.5.25 SNMP" (Traps are dealt with in menu ’2. Configuration’ 
’3. Alarms’  ’3. Traps’. See also chapter 6.5.21 SNMP Traps)