© MOBATIME BE-800652.11
1 Safety
1.1 Safety instructions
Read this chapter and the entire instruction manual carefully and follow all instructions
listed. This is your assurance for dependable operations and a long life of the device.
Keep this instruction manual in a safe place to have it handy every time you need it.
1.2 Symbols and Signal Words used in this Instruction Manual
Danger!
Please observe this safety message to avoid electrical shock!
There is danger to life!
Warning!
Please observe this safety message to avoid bodily harm and injuries!
Caution!
Please observe this safety message to avoid damages to property and devices!
Notice!
Additional information for the use of the device.
1.3 Intended Use
The DTS 480x.masterclock is a master clock for the use in network environments. It
can be synchronized from NTP and be used as NTP server. In addition, it can read the
time from DCF or GPS (e.g. from GPS 4500).
It can operate as master clock for a self-setting MOBALine clock line (with switching
function e.g. for clock illumination, switching program and for world time function) or it
can drive a line of impulse clocks or DCF active code clocks. The DTS 4802 has 2
such lines.
For additional functions, see the device descriptions in Chapter 3.4.
The device is designed for 19" racks and intended to be installed in a 19" cabinet.
Operate the device only in installed condition.
!
!
To Next Page
Loading...
