EasyManua.ls Logo

Mobatime DTS 4801.masterclock - Hardware Interfaces and Diagrams; Front and Rear Connection Diagrams

Mobatime DTS 4801.masterclock
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© MOBATIME 92 / 120 800652.11
A Connection diagrams
A.1 Front connections
PC - Terminal Connection:
Type of connector: Sub-D 9p connector (male)
Interface: RS232
Baud rate: 38400 Bauds
Data Bits: 8
Parity: no
Stop Bit: 1
Flow control: no
Cable DTS 480x – PC: Crossed cable, female – female connectors (null modem)
(DTE-DTE) Max. length of the connection 3m
Verbindungen zwischen Buchse 1 (SUB-D 9 / 1) and Buchse 2 (SUB-D 9 / 2)
SUB-D 9 / 1 SUB-D 9 / 2
Receive Data * 2 3 Transmit Data
Transmit Data * 3 2 Receive Data
Data Terminal Ready 4 1 & 6 Data Set Ready & Carrier Detect
System Ground * 5 5 System Ground
Data Set Ready & Carrier Detect 1 & 6 4 Data Terminal Ready
Request to Send 7 8 Clear to Send
Clear to Send 8 7 Request to Send
* At least needed connections.
LAN Connection:
Plug: RJ45
Interface: Ethernet, 10/100Mbit half or full duplex
Use only shielded cables!
USB Connection:
Plug: USB-Host
Important:
Only permitted for the operations with a USB stick!

Table of Contents

Related product manuals