EasyManua.ls Logo

Mobatime DTS 4801.masterclock - Status Changed [Dts480 Xstatuschanged]; Configuration Changed [Dts480 Xconfigchanged]

Mobatime DTS 4801.masterclock
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© MOBATIME 85 / 120 800652.11
9.3.3 Status changed [dts480xStatusChanged]
Sent out when the subagent detects a status change in the DTS application process.
The following variables are monitored for changes:
dts480xSysStatus, dts480xSysTimeSource, dts480xSysStratum,
dts480xSysMasterMode
This Notification is always sent out, as soon as SNMP is activated, and a destination
address is configured.
The Notification sent out contains the following data:
Field Type Size Description Example
dts480xSysStatus Unsigned Int 4 Bytes
Contains the internal system
status
66309
dts480xSysOffset Integer 4 Bytes
Actual time offset of the system
[us]
-1523 -1.523ms
dts480xSysTimeSource Byte 1 Bytes Actual time source
2
dts480xSysStratum Byte 1 Bytes Actual system stratum level
1
9.3.4 Configuration changed [dts480xConfigChanged]
Sent out when the subagent detects a configuration change in the DTS application
processes.
This Notification is always sent out, as soon as SNMP is activated and a destination
address is configured.
The Notification sent out contains the following data:
Field Type Size Description
dts480xSysConfigChangedTime TimeTicks 4 Bytes dts480xSystem
dts480xNetConfigChangedTime TimeTicks 4 Bytes dts480xNetwork
dts480xNetServicesConfigChangedTime TimeTicks 4 Bytes dts480xNetServices
dts480xTSConfigChangedTime TimeTicks 4 Bytes dts480xTimeSource
dts480xNTPConfigChangedTime TimeTicks 4 Bytes dts480xTimeNTPServer
dts480xOutLineClock1ConfigChangedTime TimeTicks 4 Bytes dts480xOutLineClock1
dts480xOutLineClock2ConfigChangedTime TimeTicks 4 Bytes dts480xOutLineClock2
dts480xOutLineDCFConfigChangedTime TimeTicks 4 Bytes dts480xOutLineDCF
dts480xOutLineSerialConfigChangedTime TimeTicks 4 Bytes dts480xOutLineSerial
dts480xOutLineTZServerConfigChangedTime TimeTicks 4 Bytes dts480xOutLineTZServer
dts480xOutLineSwitchConfigChangedTime TimeTicks 4 Bytes dts480xOutLineSwitchFct
dts480xRelayConfigChangedTime TimeTicks 4 Bytes dts480xAlarmRelayConfig
dts480xMailConfigChangedTime TimeTicks 4 Bytes dts480xAlarmMailConfig
dts480xSnmpConfigChangedTime TimeTicks 4 Bytes dts480xSnmpConfig
The ConfigChangedTime variables show the time (TimeTicks value 1/100
seconds) of
the last change of the relevant configuration group. The management system can
decide on the basis of these time values, which configurations need to be reloaded.

Table of Contents

Related product manuals