Mobileye Proprietary and Confidential
support@mobileye.com
5. Connect the Mobileye 6 EyeCAN cable (6 pin male connector CAB000205)
6. Connect the EyeCAN unit USB connector to the Laptop Computer USB port.
7. Power On the laptop computer.
8. Power on the Mobileye 6 system by turning on the vehicle ignition switch to
ACC (Accessory) position.
9. Run the Mobileye Setup Wizard Application
10. After connecting successfully and passing the System Information and Local
Information windows, you should see the Camera image Camera
Installation
NOTE: Chose the vehicle from the Internal Database in the Mobileye Setup Wizard
application before continuing.
To Next Page
Loading...
