3.5.8 Problems Accessing an SD Card
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
119/132
D12 Camera Manual Part 1
Notes:
Caution
Some SD cards cannot be set back reliably by the MOBOTIX cam-
era when rebooting. In rare occasions, the camera cannot access
such an SD card after the camera has executed a soft reboot. If
this should be the case, you need to execute a camera hard
reboot (disconnect the camera from the power supply, then recon-
nect it, e.g. by disconnecting, then reconnecting the network cable
at a PoE switch). The SD card should be once again accessible in
the usual way.
If you experience this behavior, you should also deactivate the
automatic reboot of the camera in the
Admin Menu> Time Tasks
dialog.
To Next Page
Loading...
