Mobotix D12 - Page 85

Outdoor Wall Mount (MX-WH-Dome)
When mounted to the Outdoor Wall Mount, the
D12 can be used outside for enhanced outdoor sur-
veillance. Together with the Outdoor Wall Mount, the
MOBOTIX D12 reaches protection class IP65 (abso-
lutely dustproof, resistant against water jets). Oper-
ating temperatures may vary between -30°C and +
60°C (-22°F to 140°F), making it the ideal camera for
the most demanding weather situations.
Corner and Pole Mount (MX-MH-Dome-ESWS)
If you are intending to mount the camera to the cor-
ner of a building or a pole, you should consider us-
ing the Corner and Pole Mount together with the
Outdoor Wall Mount. This Corner and Pole Mount is
made of 3mm powder-coated stainless steel
(white) and has been designed specifically for out-
door use. The supplied stainless steel straps allow
attaching the mount to poles with diameters be-
tween 60 and 180mm (2.4 to 7.1in); see section
2.11,
Mounting the Corner and Pole Mount .
Split Cable for ISDN-Only Power Supply (MX-OPT-ISDN-SPLIT)
If only ISDN is available for the camera and only one cable should be used for con-
necting the camera, you will need to inject power into the 8-wire cable using either
a power supply and the Network Power Adapter or an MX-NPR-4/8/20.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
83/132
D12 Camera Manual Part 1
Outdoor Wall Mount from
sturdy PBT 30GF
Corner and Pole Mount:
Outdoor quality made of
3mm stainless steel
Power injection into one
cable when using
only ISDN