4. Prepare the LSA+/Krone tool:
Fig. 58: LSA+/Krone tool set to LOWimpact
CAUTION! Always use the proper LSA+/Krone blade and set the tool to LOWimpact.
5. Connect the wires of the network cable using the LSA+/Krone tool according to the color code sticker
inside the box:
Fig. 59: Network wires connected using LSA+/Krone tool
CAUTION! Remove all clipped wire ends to prevent short circuits!
Mounting
Connecting the camera
76 / 110
To Next Page
Loading...
