Mobotix Q26 - Page 4

4
Table of Contents
1.5 MOBOTIXSoware 52
1.5.1 Integrated Camera Soware (Firmware) 52
1.5.2 MxManagementCenter 53
1.5.3 MOBOTIX MxBell 54
2 Installation 56
2.1 Preparing the Installation 56
2.1.1 Wall-Mounted 57
2.1.2 Ceiling-Mounted 60
2.1.3 Mounting Options 63
2.1.4 Network Connection And Power Supply, UPS 66
2.1.5 Preparing the Camera Connections, MX-Overvoltage-Protection-Box 67
2.1.6 Wiring, Fire Prevention, Lightning and Surge Protection 68
2.2 Mounting the Camera Without Accessories 70
2.2.1 Mounting Instructions 70
2.2.2 Procedure 72
2.3 Mounting the Camera with the On-Wall Set 76
2.3.1 Mounting Instructions 76
2.3.2 Procedure 79
2.4 Mounting the Camera with the In-Ceiling Set 81
2.4.1 Mounting Instructions 81
2.4.2 Procedure 84
2.5 Installing the Vandalism Set 86
2.5.1 Mounting Instructions 86
2.5.2 Procedure 87
2.6 Installing the Wall Mount 89
2.6.1 Mounting Instructions 89
2.6.2 Procedure 92
2.7 Installing the Corner and Pole Mount 94
2.7.1 Mounting Instructions 94
2.7.2 Mounting to a Pole 96
2.7.3 Mounting to a Wall or Building Corner 97
2.7.4 Mounting the Wall Mount to the Corner and Pole Mount 98
2.8 Replacing the MicroSD Card 99
2.8.1 Removing the MicroSD Card 99
2.8.2 Inserting a MicroSD Card 100