01/02 AWB8230-1413GB
19
3 Installation
The DF6 frequency inverters should be installed in a control panel
or in a metal enclosure (e.g. IP54).
Installing the DF6
The DF6 frequency inverters must be mounted vertically on a non-
flammable background.
Mounting position
Weights and dimensions of the DF6 are listed in the appendix in
section “Weights and dimensions”, page 163.
h
During installation or assembly operations on the
frequency inverter, all ventilation slots and openings
should be covered to ensure that no foreign bodies can
enter the device.
Figure 6: Mounting position
F 30˚
F 30˚
F 30˚
F 30˚
Figure 7: Installation dimensions
f 100f 100
f 50
f 50
f 100f 100
efesotomasyon.com - Klockner Moeller - inverter
To Next Page
Loading...
